Multi Integration Time (MIT) and its Advantages

To measure temperatures spanning more than one calibration range requires the acquisition of multiple thermograms with different calibrations. This can be achieved by using our Multi Integration Time feature (MIT).

The MIT function increases the dynamic range up to 16 bit and significantly extends the temperature measurement ranges. Measurement objects with large temperature gradients can be recorded with one measurement range while maintaining the maximum image refresh rate and temperature resolution. 

With constant aperture / filter setting, different integration times can be selected for up to four calibration ranges and combined with these to form a total range. The system calibration can remain unchanged. Manual switching of the measurement range becomes dispensable as well. 

But MIT is limited to a temperature range defined by the calibrations with the same filter settings. The HDR feature breaks free of these limitations, changing the filters on a frame‐to‐frame basis with up to 350 Hz. Thus, calibration ranges spanning more than 1,000 °C can be realised.

Significantly extended temperature range using the MIT function
Significantly extended temperature range using the MIT function

Asso­ci­ated Features

Thermography with ImageIR series - HDR feature - Picture credits: © iStock.com / Vershinin M

HDR – Simultaneous Mapping of Wide Temperature Ranges

The High Dynamic Range (HDR) function of the Infrared ImageIR® camera series enables measurement scenarios with extremely different temperatures to be recorded continuously. When recording in HDR mode, multiple thermograms with different integration times and different filters are recorded quickly in succession and compiled into an overall image with a high dynamic range. The measuring range can span up to 1,500 K. Users obtain high-contrast images in a wide temperature range characterized by high measurement accuracy.

InfraTec glossary - Rotating filter- und aperture wheel

Separate Filter & Aper­ture Wheel – Spec­tral Ther­mo­graphy

The combination of a separate filter and aperture wheel, allowing a total of 35 freely selectable combinations, is prerequisite for a universal application in measurement tasks with high object temperatures and in the field of spectral thermography. The neutral density filters used for signal attenuation or the combination of spectral filters and apertures reliably prevent interference effects.

Thermography with ImageIR series - HDR feature - Picture credits: © iStock.com / Vershinin M

HDR – Simultaneous Mapping of Wide Temperature Ranges

The High Dynamic Range (HDR) function of the Infrared ImageIR® camera series enables measurement scenarios with extremely different temperatures to be recorded continuously. When recording in HDR mode, multiple thermograms with different integration times and different filters are recorded quickly in succession and compiled into an overall image with a high dynamic range. The measuring range can span up to 1,500 K. Users obtain high-contrast images in a wide temperature range characterized by high measurement accuracy.

InfraTec glossary - Rotating filter- und aperture wheel

Separate Filter & Aper­ture Wheel – Spec­tral Ther­mo­graphy

The combination of a separate filter and aperture wheel, allowing a total of 35 freely selectable combinations, is prerequisite for a universal application in measurement tasks with high object temperatures and in the field of spectral thermography. The neutral density filters used for signal attenuation or the combination of spectral filters and apertures reliably prevent interference effects.

Asso­ci­ated Indus­tries & Applic­a­tions

thermal imaging for automotive applications

Auto­motive Industry

Infrared camera systems help you to secure a high product quality in production and at your suppliers.

thermal imaging in aviation

Aerospace Industry

Comply with highest security demands by applying state-of-the-art infrared camera systems.

InfraTec | Thermography in Casting, molten metal - Picture credits: @ iStock / Warut1

Metal­ Industry

Achieving continuous improvement in process reliability and productivity is a top priority in the metal industry and can be supported by thermography.

All branches and application areas

Infrared Cameras with Multi Integration Time Feature

InfraTec Infrared camera
High-end Cameras

ImageIR® 10300

Image Format(1,920 x 1,536) IR-Pixel
Detector typeInSb

InfraTec Infrared camera
High-end Cameras

ImageIR® 9400

Image Format(2,560 x 2,048) IR-Pixel
Detector typeInSb

InfraTec Infrared camera
High-end Cameras

ImageIR® 9400 hp

Image Format(2,560 x 2,048) IR-Pixel
Detector typeInSb

InfraTec Infrared camera
High-end Cameras

ImageIR® 9400 hs

Image Format(640 x 512) IR-Pixel
Detector typeInSb

InfraTec Infrared camera
High-end Cameras

ImageIR® 9300

Image Format(1,280 x 1,024) IR-Pixel
Detector typeInSb

InfraTec Infrared camera
High-end Cameras

ImageIR® 8300

Image Format(640 x 512) IR-Pixel
Detector typeMCT or InSb

InfraTec Infrared camera
High-end Cameras

ImageIR® 8300 hp

Image Format(1,280 x 1,024) IR-Pixel
Detector typeMCT or InSb

InfraTec Infrared camera
High-end Cameras

ImageIR® 8800

Image Format(1,280 x 1,024) IR-Pixel
Detector typeMCT

InfraTec Infrared camera
High-end Cameras

ImageIR® 5300

Image Format(320 x 256) IR-Pixel
Detector typeMCT

Contact to thermography division of InfraTec

Would You Like to Know More?

It is not unusual for tasks to be associated with special requirements. Discuss your specific application needs with our specialists, receive further technical information or learn more about our additional services.

United Kingdom & Irland
InfraTec GmbH Infrarotsensorik und MesstechnikGostritzer Straße 61 - 6301217 DresdenGERMANY

Further Glossary Items relating to Multi Integration Time

InfraTec thermography - High-speed Mode

High-speed Mode – Increase Frame Rate and Sens­it­ivity

Due to the binning technology, infrared cameras have two speed modes – the standard mode and the high-speed mode, in which the frame rate increases more than three times. The field of view remains constant in both modes, so the scene captured by the camera does not change. In high-speed mode, the thermal resolution also increases by a factor of two.

HighSense for thermographic camera series ImageIR®

High­Sense – Always the Optimal Camera Setting

Thanks to HighSense, ImageIR® users have the option of setting up individual measuring ranges based on the factory calibration that best suit the respective task. Depending on the measuring task, the required temperature range can be selected and the optimum integration time for this purpose is calculated – or one decides to proceed in reverse order. Thus, the calibration can be retained even in the case of changed integration times.

Thermography with ImageIR series - HDR feature - Picture credits: © iStock.com / Vershinin M

HDR – Simultaneous Mapping of Wide Temperature Ranges

The High Dynamic Range (HDR) function of the Infrared ImageIR® camera series enables measurement scenarios with extremely different temperatures to be recorded continuously. When recording in HDR mode, multiple thermograms with different integration times and different filters are recorded quickly in succession and compiled into an overall image with a high dynamic range. The measuring range can span up to 1,500 K. Users obtain high-contrast images in a wide temperature range characterized by high measurement accuracy.

MicroScan feature ImageIR

Micro­Scan – Quad­ruple the Image Format

Behind the function is a fast-rotating MicroScan wheel, which is integrated into the camera. It ensures that four different individual exposures are taken per wheel revolution, which are offset laterally by half a pixel each. In this way, thermography achieves a new quality due to thermal images providing a quadrupled spatial resolution.

Thermal image during ignition of an airbag  Image Small

Window Mode (Subwin­dowing) – Capture of Rapid Sequences

The thermal imaging camera can be operated in full, half, quarter and sub mode. With the camera control software, it is possible to use the extended subwindowing function. Using click-and-drag, freely definable sections can be set up quickly and conveniently. A defined sub-frame of the detector is picked out to achieve these extremely high refresh rates.

Thermografie-Kameraserie ImageIR® mit neuer 10 GigE-Schnittstelle

10 GigE Inter­face for a Strong Increase in Output

The 10 Gigabit Ethernet interface of the high-end camera series ImageIR® opens this extremely fast transmission standard with a NIC specially developed by InfraTec. This works with optical or electrical transceiver modules that are easy to change and are called SFP+.